Wallgard coatings, when applied over walls and wooden structures (either  clear or pigmented ), form an elastic, abrasion resistant, anti fungal protective film that eliminates water seepage. If required, decorative  paints (solvent based or water based emulsions) can also be applied over them.  They increase the life of the plastered/wooden surfaces, and do not allow paint to peel off. Their special formulation and inherent properties of the material retards growth of fungus and thereby reduces the frequency of re-painting considerably.

  USES:
This system can be used on plastered walls, cement pointing, brick walls, stone walls, wooden doors and windows of bathrooms/toilets and houses

    APPLICATION:
  Wallgard can be applied in two ways : (a) As a coloured coating-by applying a mixture of Wallgard 10 and Wallgard 30 over the surface. These coatings have good ultraviolet resistance and are used for outdoor as well as indoor damproofing applications. (b) As a transparent coating-by applying only Wallgard 10 over the surface. Transparent Wallgard 10 coatings have excellent antifungal properties together with damproofing properties and are highly recommended for anti-fungal applications. They are, however, not recommended for applications requiring direct exposure to sunlight unless an additional coat to paint (either polyurethane or oil or cement based) is applied over them. In both cases the surface should be dry and all loose particles should be removed by wire brushing and sand papering. Any oil or grease on the surface should be removed by means of de-greasing solvents or emulsifiers. For plastered walls all cracks and joints should be filled up with Ezefil crack/joint filling compound.